[GB] QK65v2 Classic (Spray Coated Top/Spray Coated Bottom)

Details

GB Start Date: 24 March 2024, 8PM

GB End Date: 22 April 2024, 11:59 PM

Format: Unlimited GB

Estimated Fulfilment: June/July 2024

Free Shipping within Malaysia

Please read QK's Notion doc here carefully and thoroughly before proceeding with your purchase.

Full Configurator on QK's Website

HE PCB will ONLY come with HE Alu Plate which is specifically designed for the HE PCB, Plate Options will not affect what plate comes with the order if you choose HE PCB.

Due to some issues with the listing and pricing structure, we can't reflect the prices for Plain and Logo Badge Set which is cheaper than the others. Hence, if you purchased a Plain or Logo Badge Set, you will receive a RM45 rebate and it will be refunded manually after the order is confirmed.

Due to differences in surface treatment techniques and coating thickness:
anodized top + spray-coated bottom is forbidden, and anodized bottom + spray-coated weight is not recommended. There will be a noticeable difference in texture among these combinations, and we do not accept returns initiated by customers solely based on dissatisfaction with this distinction.

Specs

• Typing angle: 6.5 degree
• Front height: 19.8mm
• Size: 116.5mm * 312.7mm
• Weight: around 1.4kg before build, 1.9kg after build
• Plates are available in five materials: FR4, Aluminum, POM, PC, and Carbon Fiber. The HE PCB only supports the aluminum plate to guarantee precise actuation.

PCB Specs

• 1.6mm Tri-mode ANSI Non-Flex Cut PCB
  • 1.6mm thick, Hotswapple
    
  • VIA supported
    
  • Support USB-C, Bluetooth, and 2.4GHz connection
  • No Per-key RGB
  • Support both 6.25u and 7u spacebar
  • NKRO; Polling rate: 1000Hz in wired and 2.4Ghz mode; 125Hz in BT mode
• 1.2mm Tri-mode ANSI Flex-cut PCB
  • 1.2mm thick, Hotswapple
  • VIA supported
  • Support USB-C, Bluetooth, and 2.4GHz connection
  • No Per-key RGB
  • Support both 6.25u and 7u spacebar
  • NKRO; Polling rate: 1000Hz in wired and 2.4Ghz mode; 125Hz in BT mode
• 1.6mm Tri-mode ISO Non-Flex Cut PCB
  • 1.6mm thick, Hotswapple
    
  • VIA supported
  • Support USB-C, Bluetooth, and 2.4GHz connection
  • No Per-key RGB
  • Support both 6.25u and 7u spacebar
  • NKRO; Polling rate: 1000Hz in wired and 2.4Ghz mode; 125Hz in BT mode
• 1.6mm Wired ANSI HE PCB
  • 1.6mm thick, Hotswapple
  • Using QK HE Config for configuration (only support Windows)
    
  • No Per-key RGB
    
  • Wired connection only
    
  • Polling rate: 8000Hz

Package Contents

• Case (top + bottom + weight)
  • With two pre-installed 2200mAh batteries for orders with Tri-mode PCBs
  • Orders with HE PCBs will receive two fillers for the battery compartment
• Badge set of your choice - inside the accessory box
• PCB Kit 
  • PCB of your choice
  • PE sheet + PCB Foam (for Tri-mode PCB only)
    
  • 2.4GHz dongle (for Tri-mode PCB only)
    
  • Neo Lavender Switch * 70 (for HE PCB only)
    
  • Stand-offs (for HE PCB only)
• Plate of your choice (ONLY ALU PLATE FOR HE PCB)
  
• Case foam
• PCB daughterboard - installed
• Silicone gaskets
• Rubber feet (1 set in grey and 1 set in white)
• Backup screws
• Backup rear and front clips
• Free gifts (not covered by warranty):
  • A set of 65% NeoStabs
  • Keyboard protective case
  • Screwdriver
  • Switch puller
  • Keycap puller
  • Coiled USB-C cable
    

Group Buy Policy and Disclaimer

• Strictly no refunds/cancellations after GB period has ended. 5% processing fee applicable for refunds/cancellations during the GB period.
• Do not mix GB and non GB items in the same order, as well as items from different GBs in the same order.
• This is a group buy/pre-order item. By placing an order you agree with the delivery date and acknowledge that the date may be subject to changes due to manufacturing or shipping delays.
• By placing an order, you agree to the terms stated above.